Toilet Repairs Melton and West Melbourne

A toilet that keeps running after you flush is more than just annoying. It can waste thousands of litres of water each month. The problem is usually caused by a faulty inlet valve, worn flapper seal, or float that is not stopping the water supply properly. We find the faulty part and replace it to get the toilet working normally again.

A leaking cistern can quietly send water into the toilet pan or leak onto the bathroom floor, depending on where the seal has failed. Either way, it needs to be fixed. We check the cistern, find where the water is coming from, and replace the seals or internal parts needed to stop the leak.

If water is collecting around the base of your toilet, the seal between the pan and drain could be damaged. This seal is known as a toilet pan collar or wax seal. When it fails, water can leak out whenever you flush. If left alone, this can damage the flooring and materials underneath. We replace the seal properly and test the toilet before leaving.

A blocked toilet needs to be cleared carefully. Using the wrong tools and method can push the blockage further into the pipe or damage the toilet. We use the right equipment to safely clear the blocked drain in Melton and check for anything that could cause the problem to return.

If your toilet has a weak flush or does not clear the bowl properly, the problem could be with the flush valve, inlet valve, or a partial blockage in the trap. We check the flushing system and bowl to find the cause and restore a strong and reliable flush.

A hissing, gurgling, or banging sound while the cistern refills can point to worn valves or changes in water pressure. Our team checks the toilet to find the cause of the noise and replaces any faulty parts.

Dual flush buttons can crack, stick, or stop working properly over time. We repair or replace the button assembly and flush valve when needed, helping your toilet flush properly and reliably again.